Dog Waste Station with Header Bag Dispenser
Dog Waste Station with Header Bag Dispenser
Ships free. Every order to the lower 48. No minimum.
Net 30. Select at checkout. No application.
Couldn't load pickup availability
This is the whole station. The dispenser takes header cards on prongs, holds 800 bags, and locks with a key. The can takes 13 gallons and has a hinged lid with clamps inside to hold the liner. The sign and the three section post come with it, and it's all galvanized steel, powder coated, with a protective UltraSeal top coat, in hunter green.
Everything bolts together with the hardware in the box.
Specifications
| Product code | PSG-HB |
| Dispenser | 18 × 10 × 3.4 in |
| Trash can | 24 × 12 in dia, 13 gallon |
| Sign | 11 × 9.5 in |
| Post | 3 sections, 24 in each, 3 in wide |
| Height × width × depth | |
| Material | Galvanized steel |
| Finish | Powder coated with a protective UltraSeal top coat |
| Color | Hunter green |
| Bag capacity | 800 header bags |
| Lock | Keyed dispenser, 2 keys |
What's in the box
- Header bag dispenser, keyed, with two keys
- 13-gallon can, hinged lid on stainless hardware, clamps inside to hold the liner
- Screen printed station sign
- Post, three sections
- Bolts in three lengths, a spacer, nuts and washers
Every dispenser we sell takes the same key, so a property running twenty stations opens all twenty with one.
Installation
The three post sections bolt together through a four hole overlap. Set no more than 14 inches into the ground. Concrete around the post is recommended, not required.
Hang the can with at least 4 inches of clearance underneath, put the dispenser 2 inches above the raised lid, and the sign an inch above the dispenser.
Check the spot for buried power, water and gas before you dig.
